Smart Wi-Fi LED Bulb
MSL120
- • Control your bulbs from anywhere anytime with the Meross app.
- • Works with Apple HomeKit/Siri, Amazon Alexa, Google Assistant, Line Clova, SmartThings.
- • Adjust brightness, tune light, and set from RGB colors.
- • Save up to 78.3% energy when compared with the incandescent bulb of similar brightness.
- • Works with the Wi-Fi you already have. No hub required.
- • Apple HomeKit website listed.
SPECS
Input
- US: 90-125V~, 50/60Hz
- EU/UK: 200-240V~, 50/60Hz
- JP: 90-140V~, 50/60Hz
Brightness
- 810 Lumens, 60W equivalent
Dimmable
- Yes
Tunnable
- Yes, 2700~6500 Kevin
RGB
- Yes
Beam Angle
- 180 degrees
Standby Power
- <0.5 W
Power Consumption
- 9 W
Estimated Yearly Energy Cost
- 1.08 USD, based on 3 hrs/day.
Life
- 22.8 years, based on 3 hrs/day.
Base
- E26, E27, B22
Form Factor
- A19
Antenna
- One internal antenna
Wireless Standards
- IEEE 802.11 b/g/n, 2.4GHz, 1T1R
Wireless Security
- Support 64/128 bit WEP, WPA-PSK/WPA2-PSK
- *Does not support Enterprise Wi-Fi.
Certifications
- US: FCC, UL
- EU: CE, RoHS, WEEE
- JP: Telec, PSE
Package Contents
- 1 x Smart Wi-Fi LED bulb
- 1 x User manual
System Requirements
- Smartphone running iOS 10* or later, Android 6.0 or later
- Existing Wi-Fi network
- *HomeKit version requires iOS 13 or later.
Environment
- Operating Temperature: 0°C~40°C (32°F~104°F)
- Storage Temperature: -40°C~70°C (-40°F~158°F)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
FAQS
○
How to reset Meross smart bulb?
Turn off the light switch that controls the bulb, and then turn the light switch on and off 5 times, leaving it in the ON position. Please note that after restoring the factory settings, the smart bulb will clear all custom settings, so you must set it up again.
○
Is the installation of Meross smart bulb complicated?
No. It is the same as you replace a standard light bulb.
Learn More
Scan to Install
Scan to Download APK File for Android