The MSG150/MSG150HK is specifically designed for Chamberlain, LiftMaster, and Craftsman garage door openers that feature yellow, purple, red, or orange learn buttons and operate on Security+ 1.0 or 2.0 technology.
* Note: Click here to find out which technology your opener operates on.
However, if your garage door opener falls into one of the following categories, please follow the steps below:
- It is one of the three brands mentioned above but uses Dry Contact mode (e.g., green learn button, or some older red learn buttons with three control holes on the back of the motor unit).
- It is from another brand, such as Genie or Overhead Door.
What to do:
1. Contact Meross Support and provide the following information:
- A screenshot of your order confirmation.
- Your shipping address.
- Your garage door opener's brand information or photos showing the motor unit and learn button.
2. Once our support team verifies your submission, we will send you a set of door sensors free of charge(order must be in warranty).
3. After you receive the sensors, you will need to:
-Set your MSG150 to Dry Contact Mode.
-Install the included door sensors according to the provided instructions.
*Note: If you have not purchased the MSG150, we recommend the MSG100 or MSG200 to you.