Smart Wi-Fi Hub

  • Compact housing, size 5.8 x 4.1 x 2.1 cm.
  • Support both 802.11n Wi-Fi and 433MHz RF.
  • Bridge your meross low-power-consumption smart devices such as smart sensors and smart thermostat valves to the Internet.
  • Works with the Wi-Fi you already have.
    Compatible Devices
    • HomeKit Integrated Hub
    • MS100, MS100F, MS200, MS400, MTS100, MTS150, MTS150P, GS559A
    • Non-HomeKit Integrated Hub
    • MTS100, MS100
    • 5V DC, 500mA Min.
    Dimensions (W x D x H)
    • 59x41x21mm / 2.3 x1.61x0.83in.
    • 1 x Status LED
    • 1 x Power button
    • Press twice within 2 seconds to enter pairing mode.
    • Press and hold for 5 seconds to initiate the factory reset process.
    • One Wi-Fi internal antenna
    • One 433MHz RF internal antenna
    Wireless Standards 
    • IEEE 802.11 b/g/n, 2.4GHz,
    • 1T1R 433MHz RF
    Wireless Security 
    • 64/128 bit WEP, WPA-PSK/WPA2-PSK supported
    • *Does not support Enterprise WiFi.                    
    • CE, RoHS, WEEE, FCC,IC
    System Requirements
    • Smartphone running iOS 10* or later, Android 6.0 or later
    • Existing Wi-Fi network
    • *HomeKit version requires iOS 13 or later.
    • Operating Temperature: 0°C~40°C (32°F~104°F)
    • Storage Temperature: -40°C~70°C (-40°F~158°F)
    • Operating Humidity: 10%~90% non-condensing
    • Storage Humidity: 5%~90% non-condensing
    How many devices does a Meross Smart Hub support?

    A Meross Smart Hub can support up to 16 devices.


    Does Hub support remote upgrade?

    The firmware of Hub supports remote upgrade. When there is a firmware update, you will receive a prompt, and then you can upgrade the firmware of Hub in the Meross App.


    Learn More