/

Smart Wi-Fi LED Bulb

MSL120 BR30
  • Control your bulbs from anywhere anytime with the Meross app.
  • Works with Apple HomeKit/Siri, Amazon Alexa, Google Assistant, SmartThings.
  • Adjust brightness, tune light, and set from RGB colors and 2700K-6500K color temperature.
  • Save up to 78.3% energy when compared with the incandescent bulb of similar brightness.
  • Works with the Wi-Fi you already have. No hub required.
  • Apple HomeKit website listed.
SPECS
Input
  • 90-125V~, 50/60Hz
Brightness
  • 1300 Lumens
Dimmable
  • Yes
Tunnable
  • Yes, 2700~6500 Kevin
Power Consumption
  • 14W
Estimated Yealy Energy Cost
  • 1.68 USD, based on 3 hrs/day.
Life
  • 22.8 years, based on 3 hrs/day.
Base
  • E26
Form Factor
  • BR30
Antenna
  • One internal antenna 
Wireless Standards 
  • IEEE 802.11 b/g/n, 2.4GHz, 1T1R    
Wireless Security 
  • Support 64/128 bit WEP, WPA-PSK/WPA2-PSK
  • *Does not support Enterprise Wi-Fi.                    
Certifications
  • FCC, UL
Package Contents       
  • 1 x Smart Wi-Fi LED bulb
  • 1 x User manual
System Requirements
  • Smartphone running iOS 13 or later, Android 6.0 or later
  • Existing Wi-Fi network
Environment
  • Operating Temperature: 0°C~40°C (32°F~104°F)
  • Storage Temperature: -40°C~70°C (-40°F~158°F)
  • Operating Humidity: 10%~90%­ non-condensing
  • Storage Humidity: 5%~90%­ non-condensing
FAQS
How to reset Meross smart bulb?

Turn off the light switch that controls the bulb, and then turn the light switch on and off 5 times with 1-second intervals, leaving it in the ON position. Please note that after restoring the factory settings, the smart bulb will clear all custom settings, so you must set it up again.

 

Video reference:

Is the installation of Meross smart bulb complicated?

No. It is the same as you replace a standard light bulb.

Learn More
DOWNLOAD
Manual
UG_MSL120HK(US)_2307_EN