Smart Wi-Fi Dimmer and Remote Kit

  • Replace single-pole dimmable switch. Not compatible with a 3-way switch.
  • Turn single-pole dimmable switch to 3-way dimmable switch with the Remote device.
  • Dim your INC, CFL, and LED bulb to suit different scenes.
  • Works with Apple HomeKit, Amazon Alexa, Google Assistant, and SmartThings.
  • Control your lights anytime anywhere with Meross app.
  • Create on/off schedules or auto-off timers to work automatically.
  • Easy to install and setup. No extra hub required.
  • Neutral wire(white wire) required. Works with 2.4GHz Wi-Fi only.
  • Apple HomeKit website listed.
  • 120V~, 60Hz
  • 400W Max. for INC
  • 150W Max. for CFL&LED
  • Master Switch:
  • 1 x On/Off button: Press and hold for 5 seconds to initiate the factory reset process
  • 2 x Brightness button
  • 1 x Reboot button
  • Remote Switch:
  • 1 x On/Off button: Press and hold for 5 seconds to initiate the factory reset process
  • 2 x Brightness button
  • Master Switch:
  • 1 x Status LED
  • 5 x Brightness LED
  • Remote Switch:
  • 1 x Status LED
Dimensions ( W x D x H )
  • Master Switch:
  • 1.7 x 1.5 x 4.1 in. (without wall plate)
  • 2.8 x 0.2 x 4.7 in. (wall plate)
  • Remote Switch:
  • 2.6 x 1.3 x 0.5 in.
  • One internal antenna
Wireless Standards
  • IEEE 802.11 b/g/n, 2.4GHz, 1T1R
Wireless Security
  • Support 64/128 bit WEP, WPA-PSK/WPA2-PSK
  • *Does not support Enterprise Wi-Fi.
  • FCC, IC, ETL
Package Contents
  • 1 x Smart WiFi dimmable switch
  • 1 x Remote switch
  • 2 x Faceplate
  • 4 x Wiring nut
  • 2 x Screw
  • 1 x User manual
System Requirements
  • Smartphone running iOS 9* or later, Android 4.1 or later
  • Existing Wi-Fi network
  • *HomeKit version requires iOS 13.0 or later.
  • Operating Temperature: 0°C~40°C (32°F~104°F)
  • Storage Temperature: -40°C~70°C (-40°F~158°F)
  • Operating Humidity: 10%~90% non-condensing
  • Storage Humidity: 5%~90% non-condensing
What should I do when my Meross app cannot control the added wall switch?

You can troubleshoot in the following ways:

  • Check the Internet connection of the home Wi-Fi.
  • Make sure your home Wi-Fi password has not been changed.
  • Do not use a metal faceplate on the wall switch, as that will reduce the Wi-Fi signal.
  • Restart the switch by pressing the restart button.
  • If all other methods fail, press and hold the power button for 5 seconds to restore factory settings, and then try to add again.





Learn More
UG_General_Purpose Homekit user manual_2307_EN