Upgrade firmware for your HomeKit devices! We have released new firmwares for HomeKit devices to drastically improve the connection stability. Please refer to www.meross.com/support/FAQ/447.html and upgrade your HomeKit devices.
Global

Japan

Global

Türkiye

/
English

English

Please ensure that your device is the HomeKit version before proceeding with the setup code.

For Android users, you can configure the accessory in the Android Meross app and then navigate to device settings > HomeKit setup code to retrieve it.

 

If you are using iOS, follow these steps to obtain the setup code:

 

1. Power up the device and press and hold the power/reset button for 5 seconds to factory reset (different devices may have different reset methods, please refer to your device's user manual).

2. Keep the device in the factory mode for 20 minutes.

3. Open the Meross app, tap the + button, select the smart device, and choose the Non-HomeKit version for setup. If the Non-HomeKit setup option is unavailable for some devices, you can select any other device from the list.

4. If the setup is successful, you can find the HomeKit code for this product on the Meross app product settings page. Then, open the Apple Home app to enter the HomeKit code and add the device again.

 

If you still cannot solve the issue, please contact Meross Support with below information:

 

1. your Amazon order invoice.

2. the original Wi-Fi name of the accessory. Follow the user manual to reset the accessory, and go to your phone's Wi-Fi settings page to find it.