Smart Floor Lamp

  • Eye caring light, provides soft and flicker-free light to avoid eye strain and dryness.
  • 3 in 1 design, flexible choice between floor lamp, desk lamp and clamp lamp.
  • Control your lamp from anywhere anytime with the Meross.
  • Works with Apple HomeKit/Siri, Amazon Alexa, Google Assistant, SmartThings.
  • Customizable illumination, stepless brightness and color temperature level adjustment.
  • 10V/1.2A
Rated Power
  • 12W
  • 650 Lumens
Color Temperature
  • 2700K-6000K
  • Floor Lamp: 47x23x139cm or 18.5x9.1x54.7 in.
  • Clamp Lamp: 47x23x56cm or 18.5x9.1x22.0 in.
  • Table Lamp: 47x23x56cm or 18.5x9.1x22.0 in.
  • One internal antenna 
Wireless Standards 
  • IEEE 802.11 b/g/n, 2.4GHz, 1T1R
Wireless Security 
  • Support 64/128 bit WEP, WPA-PSK/WPA2-PSK
  • *Does not support Enterprise Wi-Fi.
  • US: FCC/IC
  • EU: CE, RoHS, WEEE
Package Contents
  • 1 x Smart Lamp
  • 1 x User Manual
  • 1 x Power Adapter
  • 2 x Lamp Pole
  • 1 x Lamp Base
  • 1 x Lamp Clamp
  • 3 x Fastener
  • 1 x IR Remote Controller and holder
System Requirements
  • Smartphone running iOS 13 or later, Android 6.0 or later
  • Existing Wi-Fi network
  • Operating Temperature: 0°C~40°C (32°F~104°F)
  • Storage Temperature: -40°C~70°C (-40°F~158°F)
  • Operating Humidity: 10%~90%­ non-condensing
  • Storage Humidity: 5%~90%­ non-condensing
What should I do when my Meross app is unable to control the added device?

You can troubleshoot the following:

·If you paired the device with Home app,please add it again by Meross app.

·Check whether your home Wi-Fi is connected to the internet or not.

·Make sure the password of your home Wi-Fi hasn't been changed.

·Make sure your device is covered by your home Wi-Fi.Moving it closer to Wi-Fi router or install a Wi-Fi range extender would help.

·If all else fails,please factory reset your device and try to add it again.

How do I reset my smart lamp?

Hold the power button for 5 seconds, it will reset and enter Wi-Fi configuration mode. Note that factory reset will erase all of your custom settings, and you'll have to set it up again.

How to fix a pairing failure?

Please visit for solution.

My Home app cannot add the device by scanning the QR code.

You can tap "Don't Have a Code or Can't Scan" and input the setup code manually.


I can't pair my device with HomeKit anyhow.

Please make sure your iOS is connecting to the 2.4GHz of your home Wi-Fi and you are having iOS 13 or later. Restart your iOS will help due to some system cache issue.

You can learn more here.





Learn More