Shop

Smart Temperature and Humidity Sensor Kit

MS100H
  • Monitor temperature and humidity via the Meross app anywhere anytime, such as baby's room, refrigerators, basement, etc.
  • Get instant alerts when the temperature and humidity exceed your preset values.
  • Compact size (1.57 x 1.57 x 0.55 in.), thread for fixation, with wide range connection (100 ft typically).
  • When Temperature or Relative Humidity reaches a particular value, the sensor will trigger other devices on/off automatically.
  • To analyze how data affects your life, view and extract historical data simply.
  • *Hub Included
    SPECS
    Temperature Range
    • -10°C~50°C (14°F~122°F)
    Humidity Range
    • 0~100%
    • (Prolonged exposure to >80% RH may create an offset of up to 3% in the readings.
    • This effect gradually reverses after return to <80% RH conditions.)
    Battery
    • CR2477, typical over 1 year life
    Button
    • 1 x Reset Button
    • Insert a pin into the hole and hold for 5 seconds to initiate factory reset process
    LED
    • 1 x Status LED
    Dimensions (W x D x H)
    • Sensor: 1.57 x 1.57 x 0.55 in. or 40 x 40 x 14 mm
    Weight
    • Sensor: 25g or 0.9 oz
    Temperature Accuracy (0°C~40°C / 32°F~104°F)
    • ±0.3°C / ±0.5°F typical, ±0.5°C / ±0.9°F maximum
    Temperature Accuracy (Full Range)
    • ±0.7°C / ±1.3°F typical, ±1.2°C / ±2.2°F maximum
    Humidity Accuracy (@25°C / 77°F from 20% ~80%)
    • ±3.0% typical, ±4.5% maximum
    Humidity Accuracy (@25°C / 77°F from 0% ~100%)
    • ±4.5% typical, ±7.5% maximum
    Wireless Standard
    • 433MHz
    Certifications
    • CE, RoHS, WEEE, FCC, IC
    Package Contents
    • 1 x Smart Sensor
    • 1 x CR2477 Battery
    • 1 x User Manual
    • 1 x Double-sided Adhesive Tapes
    • 1 x Thread
    • 1 x Smart Hub(MSH300)
    System Requirements
    • Smart phone running iOS 10.0 or later, Android 6.0 or later
    • Existing Wi-Fi network
    • Meross Smart Hub(MSH300)
    Environment
    • Storage Temperature: -40°C~70°C (-40°F~158°F)
    • Storage Humidity: 0%~100%­
    FAQS
    Does Sensor support Hubs of other brands (such as Samsung's)?

    Not supported. For a better user experience, please use Meross's original Hub.

     

    How to communicate between Sensors and Hub?

    The Sensors and Hub communicate using a radio frequency of 433MHz.

     

    How to replace the battery of the Temperature and Humidity Sensor Sensor?

    Please follow below figure to open the device's housing. And then you can replace its battery easily.

    Does this product support HomeKit functionality?

    This product does NOT support HomeKit functionality, but you can use it in the Meross app.

    Learn More
    DOWNLOAD
    Manual
    UG_MS100_2104_multi-language